Why won't my Relisys 42" TV won't power up?

Answer by  DackThrombosis (1093)

The television set might be stuck in standby. Check and make sure your remote control is functioning properly. Something in the remote could be stuck and causing the problem. If that's not it, you've probably got an internal issue. That means a costly repair bill or a new set.

Answer by  chingsunny81300 (14)

1.the circuit inside the TV might be broken ,or ; 2.the button and remote connected the circuit do not work. 3.the monitor doesn't connect well to the circuit.

Answer by  Anonymous

it's a gpu problem, i recommend leaving the tv on for about 20-40 minutes for the system to heat up and then the solder joints will melt re-attaching them selfs to the circuit board. its a very common problem that occurs with many electrical goods. well this was my issue.

Answer by  jajise93 (5)

I Have the same problem, if i leave my relisys plasma 42" on then switch it off, it will change standby light led colour from orange/ red to green but there is no picture. just the sound of the relay connectors clicking about, more than likely a new relayswitch?