How do you replace a door lock cylinder on a Chrysler Minivan?

Answer by  hopeonpop (54)

To remove the locks from your doors you will need to first remove the inside door panel. Next, you will need to remove the retaining clip from behind the lock. Third, you will need to remove the connecting from from the back of the lock. Reverse above steps for installation.

Answer by  chazeloff (324)

First remove the door panel and remove the plastic noise dampener then remove the rod going to the lock then all you have to do is either unscrew the lock cylinder or take the clip off to remove it the reverse the steps to install.

Answer by  Liz59 (10966)

Well, to replace the cylinder, you should go to the garage and get it done. It is not easy to do yourself.

Answer by  James916 (539)

You would first have to remove the door panel itself. You would pop all the clips around the outside out to get it off. There may also be some screws holding it on. Then you should be able to see your door lock cylinder. Remove the bolts that hold it in and remove it.