car repairs






 

Question by  PHolloway (45)

How do you remove the timing belt from a Buick Century?

I need to change out the timing belt on my Buick Century and would like to know what tools to use and how to do it.

 
+5

Answer by  nicholas34 (606)

its really not that hard to you, all you need is a screwdriver and plyers to make sure it comes off efficiently, then buy the new belt and streatch it out until it is on safely

 
+5

Answer by  dee73 (1062)

Make a drawing to make sure you put the new belt back on correct. Start by removing the right side motor mount and all accessories from in front of the timing belt case. Then at the tension pulley and use a wrench or a bar to unload the spring. The pulley will only one way.

 
+5

Answer by  worker8388 (994)

First make a drawing,how the belt is routed on the components because you will not remember to reinstall. Slip the belt off the tensioner then with the suitable wrench or bar unload the spring. The tensioner will have spring loaded,it will move in one direction so will get the belt slip off.

 
+5

Answer by  Amber40 (24961)

Well not knowing the year I can only give you a rough description. You need to removing any accessories in front of the timing cover. Then the cover is removed and the cams are locked so they won't move. Then the tensioner is loosened and the belt can be replaced.

 
+4

Answer by  cgrid76hotmailcom (545)

First remove the motor mount ont right side of the car .Once that is out of the way you can work more freely .Find the timimg chain cover remove it

 
+3

Answer by  bendontsignautographs (11)

Look under your hood at the timing belt locate what bolts and nuts hold it tight use corresponding tools look at how it is and copy it just think to yourself im replacing this.

 
+2

Answer by  japratt (1687)

If you are wanting to remove the timing belt then you will need get under the hood to remove it.

 
You have 50 words left!