car repairs






 

Question by  dantheman3k (39)

How do I replace a front oil seal on a Hyundai Accent?

 
+7

Answer by  laura27 (1216)

Jack car up. Remove oil pan. Once oil pan is off you'll see bottom of engine, the crankshaft. Remove front bearing cap, seal is inside this cap. Replace new one.

 
+6

Answer by  Atomicrayon (2504)

Locate the oil pan by climbing underneath your cab, It'll be somewhere either near or around where your engine and it's coils are located. It should be pretty easy to locate either the busted seal. From there you'll need to remove it, which can be done by hand. And then place the new one on, also by hand.

 
+6

Answer by  thattractorguy (2970)

First, jack up the car. Remove the oil pan. Once you have the oil pan off you will see the bottom of the engine including the crankshaft. Remove the front bearing cap. The seal is inside this cap. Replace it with a new one. Installation is the reverse of removal.

 
+5

Answer by  worker8388 (994)

Remove the oil drain plug. Then remove the oil-filter. Remove the seal from top of the filter. Coat the seal with fresh oil. Reattach oil filter and oil drain plug.

 
+3

Answer by  samisaysalways70 (69)

According to me if you want to replace a front oil seal on a Hyundai Accent, so you just have to concern a good mechanic.

 
+3

Answer by  japratt (1687)

To replace the front oil seal in your Hyundai Accent your will need to get under the car and replace the screws.

 
You have 50 words left!