lawn mowers


Question by  Angela58 (29)

How do I repair the rope on a Craftsman tiller?


Answer by  Sky75 (216)

To replace the rope take the recoil cover off tiller. Wind the rope back on the recoil backwards. Replace on tiller and test.


Answer by  SIDDHU (861)

Pull the old rope off the pully, spun back the pully and then feed the new rope into the pully.


Answer by  Joe1010us (239)

There are several screws holding the cover in place. Remove the cover leaving the rope and pully exposed. After pulling the rope off off the pully the pully itself must be spun backwards so the pully has enough tension to feed all of the new rope back into the pully.


Answer by  japratt (1687)

If you are wanting to repair the rope on this device you will need to make sure the engine is off.


Answer by  billyb (562)

the whole starter unit comes off the side of the motor. the rope is inside of the unit. check with mechanic to replace the rope.

You have 50 words left!