Can you help me troubleshoot my Toyota Corolla clutch problems?

Answer by  RJeevendran (28)

clutch is operated by hydraulic cylinders,it is for the most part self adjusting,only adjustment that cane be made at the master cylinder under left side of the dash,look for the pushrod and loosen the two locknuts,then you can turn the rod until there is about 1/8" play at the pedal.

Answer by  hibpmgirl (2166)

If the clutch is not doing its job, try tightening cluth cable. If clutch is slipping probably need to replace the clutch itself most likely.

Answer by  champaign9497 (11977)

That would all depend on the problems you are having with it but the first thing you need to do is check the clutch fluid.

Answer by  aj20 (29)

The first place to start would be to check and change the fluid, it should be red, not brown. When draining it look for debris.